Loading…
Stretch Film Advisory
Most pallets I see are not as stable as they could be, and use far more film than necessary. I optimise your machine settings and supply the right multilayer film to give you a more stable pallet at 30-50% lower cost.
No obligation. I visit your site for 3-4 hours, measure everything, and deliver a detailed savings report within one week. The assessment is free because I earn from the film, not from the advice.
INDEPENDENT ADVICE & SUPPLY ACROSS 25+ EUROPEAN COUNTRIES
Years of Experience
Countries Across Europe
Sites Assessed
Cost Reduction
The Problem
Most companies I visit have good machines, but the wrong settings. Their pre-stretch is set to 200% when 300% is achievable. They use 23-micron film when 10-micron performs better. They wrap five times when three would hold. The root cause is always the same: not knowing what modern film and proper settings can do.
A company wrapping 200 pallets a day can save over €30,000 per year
Modern 67-layer multilayer film holds loads tighter at half the thickness, so you use less material and get a more stable pallet
95% of my assessments achieve more than 30% film reduction
Industries I Serve
From automotive parts to building materials. High-volume lines where even a small reduction per pallet adds up to five-figure annual savings.
Fast-moving consumer goods require stable pallets and consistent wrapping. I optimise for speed and stability on high-throughput lines.
Distribution centres wrapping hundreds of pallets daily. Even small per-pallet savings add up to tens of thousands per year.
Mixed loads, varying pallet heights, multiple product types. I configure machines to handle the full range without film waste.
The Process
I visit your site for half a day. I measure holding force (how tightly the film grips your load), stretch percentage, film weight per pallet, and wrap patterns.
Within a week, you receive a detailed report: current situation with photos, recommended changes, and projected savings in euros.
I configure your machines on-site, adjusting pre-stretch ratios, wrap force, and overlap patterns. I train your operators on the new settings.
Results are measured the same day. I verify holding force to confirm pallet stability equals or exceeds your previous setup.
Why Stretch Film Advice
45 years in pallet wrapping. Over 1,000 sites assessed across 25+ countries. I was one of the first people in Europe to sell pallet wrapping machines, back in 1981. I know roughly 40 different machine brands and types, so I can optimise your equipment regardless of what is on your floor.
Learn moreA half-day assessment, a detailed report within a week, and same-day verified results. The assessment is completely free. I work as an agent for the world’s largest stretch film producer, so my costs are covered through film supply.
View servicesTypical Results
Real numbers from an actual client assessment.
| Metric | Before | After | Improvement |
|---|---|---|---|
| Film Thickness | 23 micron conventional | 12 micron Nano Multilayer | 48% thinner |
| Pre-stretch | 180% | 280% | 56% more stretch force |
| Film per Pallet | 378 grams | 226 grams | 40% less film |
| Load Stability | 12 kg holding force | 18 kg holding force | +50% holding force |
The assessment is free and takes half a day. Most companies discover they can cut film costs by 30-50% while improving pallet stability.
